Фланци за универсални патронници тип “C”Фланци за универсални патронници тип “C”

“C” Type Flange for Universal Chuck

54.00€ – 223.00€w/o VAT

  • Spindle of lathe: C type according to DIN 55027, DIN 55022 and ISO 702/III
  • Universal chucks – self-centering and with independent jaw movement
  • Mounting of flanges to the nose – bayonet type
  • Mounting the chucks to the flanges – flat nose and short cylinder alignment, connection with bolts
  • 9 types
Clear

Technical Specifications

Catalogue № Diameter, mm Spindle Spindle accession dimensions, mm Accession dimensions of chucks according to DIN 6350, mm
3-jaw self-centering 4-jaw non-self-centering
A C D E F G E F G
160/С5 160 С5 160 82.563 104.8 125 140 4 65 95 4
200/С5 200 С5 200 82.563 104.8 160 175 4 75 95 5
200/С6 200 С6 200 106.375 133.4 160 175 4 75 95 5
250/С6 250 С6 250 106.375 133.4 200 224 5 110 130 5
250/С8 250 С8 250 139.719 171.4 200 224 5 110 130 5
320/С8 320 С8 320 139.719 171.4 260 286 5 140 165 5
320/С11 320 С11 320 196.869 235 260 286 5 140 165 5
400/С11 400 С11 400 196.869 235 330 362 5 160 185 6
500/С11 500 С11 500 196.869 235 420 458 5 200 236 6

General Information

  • The flanges are finally machined to join the spindle of the lathe. The flange nose for chuck attachment  is roughly machined (scheme I).
  • The flange nose and the chuck accession dimensions (dimensions E, F and G) are finally processed after mounting the lathe where they will be used (scheme II). This ensures the flange accuracy, which will be equal to the accuracy of the working spindle.
  • Dimensions E, F and G are only informative and they correspond to chuck accession according to standard DIN 6350. For other standards, the customer should specify the accession dimensions himself.
  • Offers for other sizes and types of chuck flanges – upon request.