Циркулярeн диск за металЦиркулярeн диск за метал

Circular saw blades

61.00132.00w/o VAT

HSS circular saws

High-speed steel circular discs (HSS-DMO5; DIN 1.3343) high in tungsten and molybdenum 5%, suitable for cutting steel and alloys with a tensile strength of between 500 N / mm² and 1100 N / mm². The discs are used on manual, semi-automatic and fully automatic pipe and profile cutting machines.

Types of coating:

Coating thickness 2.5 μm. It was obtained by plasma coating with a layer of titanium and carbon, giving it a hardness of 3000 according to Vickers (HV 0.05). The coefficient of friction (0.22) is very low due to the strong presence of carbon. This feature makes it highly suitable for medium-alloyed steels with hardness up to 800 N /m². This coating needs cooling during operation, it is resistant at a temperature of 400 ° C.

 

Multilayer coating of 3 μm thickness and 3400 surface hardness according to Vickers (HV 0.05). The friction coefficient is 0.45 and this allows the discs to be used when cutting with low or no cooling. The maximum cutting temperature is 560 ° C. Used for cutting high-alloyed steels with hardness up to 1100 N/mm², for cutting cast iron, stainless steel and all kinds of materials that develop high temperature.

Clear

Technical Specifications

*UNI SLOTS = 2/8/45 + 2/11/63 + 2/9/50

Diameter Inner hole Thickness Teeth number Teeth form Pin holes PRICE BGN excl. VAT
225 32 2 220 BW UNI SLOTS *
92.00 99.00
160
120 C
275 32 2 220 BW UNI SLOTS *
122.00 129.00
180
120 C
315 32 2.5 240 BW UNI SLOTS *
172.00 179.00
200
140 C
315 40 2.5 240 BW 2/8/55 + 4/12/64
172.00 179.00
200
140 C
350 32 2.5 280 BW UNI SLOTS *
199.00 209.00
220
160 C
 

Teeth form

BW – RECOMMENDED FOR CUTTING PIPES AND PROFILES. THE INTERCHANGEABLE LEFT AND RIGHT BEVEL EDGE ENSURE GOOD CHIPS RELEASE.

C – THIS FORM ENSURES THE CHIP DIVISION INTO THREE AND IS SUITABLE FOR CUTTING THICK-WALLED TUBES AND THICK PROFILES.